This is the latest recevied telemetry packets stored in our database for station/object EA4ATS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781609758 | 4 Count | 300 Count | 0 Count | 0 VDC | 0 VDC |
| 1781607955 | 3 Count | 234 Count | 0 Count | 0 VDC | 0 VDC |
| 1781606151 | 2 Count | 182 Count | 0 Count | 0 VDC | 0 VDC |
| 1781604382 | 1 Count | 124 Count | 0 Count | 0 VDC | 0 VDC |
| 1781602579 | 0 Count | 68 Count | 0 Count | 0 VDC | 0 VDC |
| 1781600776 | 17 Count | 1067 Count | 0 Count | 0 VDC | 0 VDC |
| 1781598972 | 16 Count | 1000 Count | 0 Count | 0 VDC | 0 VDC |
| 1781597169 | 15 Count | 939 Count | 0 Count | 0 VDC | 0 VDC |
| 1781595365 | 14 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1781593561 | 13 Count | 786 Count | 0 Count | 0 VDC | 0 VDC |
| 1781591758 | 12 Count | 725 Count | 0 Count | 0 VDC | 0 VDC |
| 1781589954 | 11 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1781588151 | 10 Count | 593 Count | 0 Count | 0 VDC | 0 VDC |
| 1781586380 | 9 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1781584577 | 8 Count | 460 Count | 0 Count | 0 VDC | 0 VDC |
| 1781568379 | 13 Count | 957 Count | 0 Count | 0 VDC | 0 VDC |
| 1781561166 | 9 Count | 617 Count | 0 Count | 0 VDC | 0 VDC |
| 1781559362 | 8 Count | 520 Count | 0 Count | 0 VDC | 0 VDC |
| 1781557559 | 7 Count | 462 Count | 0 Count | 0 VDC | 0 VDC |
| 1781555756 | 6 Count | 411 Count | 0 Count | 0 VDC | 0 VDC |
| 1781553952 | 5 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1781552149 | 4 Count | 298 Count | 0 Count | 0 VDC | 0 VDC |
| 1781550379 | 3 Count | 245 Count | 0 Count | 0 VDC | 0 VDC |
| 1781546772 | 1 Count | 127 Count | 0 Count | 0 VDC | 0 VDC |
| 1781544969 | 0 Count | 63 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)