This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765300610 | 291 Count | 835 Count | 251 Count | 0 VDC | 0 VDC |
| 1765297008 | 250 Count | 750 Count | 212 Count | 0 VDC | 0 VDC |
| 1765295208 | 240 Count | 709 Count | 203 Count | 0 VDC | 0 VDC |
| 1765293415 | 233 Count | 689 Count | 197 Count | 0 VDC | 0 VDC |
| 1765289814 | 173 Count | 576 Count | 139 Count | 0 VDC | 0 VDC |
| 1765286212 | 162 Count | 533 Count | 130 Count | 0 VDC | 0 VDC |
| 1765282611 | 156 Count | 500 Count | 126 Count | 0 VDC | 0 VDC |
| 1765279010 | 151 Count | 473 Count | 123 Count | 0 VDC | 0 VDC |
| 1765277209 | 148 Count | 461 Count | 121 Count | 0 VDC | 0 VDC |
| 1765275408 | 145 Count | 450 Count | 119 Count | 0 VDC | 0 VDC |
| 1765273608 | 140 Count | 436 Count | 115 Count | 0 VDC | 0 VDC |
| 1765271814 | 137 Count | 424 Count | 113 Count | 0 VDC | 0 VDC |
| 1765270013 | 134 Count | 413 Count | 111 Count | 0 VDC | 0 VDC |
| 1765268212 | 131 Count | 402 Count | 109 Count | 0 VDC | 0 VDC |
| 1765266412 | 128 Count | 390 Count | 107 Count | 0 VDC | 0 VDC |
| 1765264611 | 125 Count | 379 Count | 105 Count | 0 VDC | 0 VDC |
| 1765262810 | 118 Count | 358 Count | 99 Count | 0 VDC | 0 VDC |
| 1765261010 | 100 Count | 312 Count | 82 Count | 0 VDC | 0 VDC |
| 1765259209 | 90 Count | 284 Count | 73 Count | 0 VDC | 0 VDC |
| 1765257408 | 85 Count | 268 Count | 69 Count | 0 VDC | 0 VDC |
| 1765255608 | 80 Count | 252 Count | 65 Count | 0 VDC | 0 VDC |
| 1765253807 | 75 Count | 238 Count | 61 Count | 0 VDC | 0 VDC |
| 1765252006 | 68 Count | 220 Count | 55 Count | 0 VDC | 0 VDC |
| 1765250213 | 64 Count | 206 Count | 52 Count | 0 VDC | 0 VDC |
| 1765248413 | 60 Count | 192 Count | 49 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)