This is the latest recevied telemetry packets stored in our database for station/object SR2ST-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765020561 | 47 Count | 27 Count | 11 Count | 0 VDC | 0 VDC |
| 1765018880 | 34 Count | 20 Count | 9 Count | 0 VDC | 0 VDC |
| 1765015518 | 1007 Count | 586 Count | 144 Count | 0 VDC | 0 VDC |
| 1765013837 | 994 Count | 578 Count | 142 Count | 0 VDC | 0 VDC |
| 1765012157 | 981 Count | 570 Count | 140 Count | 0 VDC | 0 VDC |
| 1765010476 | 968 Count | 563 Count | 138 Count | 0 VDC | 0 VDC |
| 1765005433 | 930 Count | 542 Count | 133 Count | 0 VDC | 0 VDC |
| 1765003753 | 917 Count | 534 Count | 131 Count | 0 VDC | 0 VDC |
| 1765002072 | 905 Count | 527 Count | 129 Count | 0 VDC | 0 VDC |
| 1765000641 | 890 Count | 520 Count | 127 Count | 0 VDC | 0 VDC |
| 1764998960 | 879 Count | 513 Count | 126 Count | 0 VDC | 0 VDC |
| 1764997279 | 866 Count | 506 Count | 124 Count | 0 VDC | 0 VDC |
| 1764995598 | 854 Count | 498 Count | 122 Count | 0 VDC | 0 VDC |
| 1764993917 | 840 Count | 490 Count | 120 Count | 0 VDC | 0 VDC |
| 1764992237 | 826 Count | 483 Count | 118 Count | 0 VDC | 0 VDC |
| 1764990556 | 813 Count | 475 Count | 116 Count | 0 VDC | 0 VDC |
| 1764988875 | 800 Count | 468 Count | 114 Count | 0 VDC | 0 VDC |
| 1764987194 | 789 Count | 461 Count | 113 Count | 0 VDC | 0 VDC |
| 1764985513 | 778 Count | 454 Count | 112 Count | 0 VDC | 0 VDC |
| 1764983833 | 766 Count | 447 Count | 110 Count | 0 VDC | 0 VDC |
| 1764972317 | 674 Count | 395 Count | 97 Count | 0 VDC | 0 VDC |
| 1764968955 | 649 Count | 380 Count | 93 Count | 0 VDC | 0 VDC |
| 1764965593 | 625 Count | 366 Count | 90 Count | 0 VDC | 0 VDC |
| 1764963913 | 613 Count | 358 Count | 88 Count | 0 VDC | 0 VDC |
| 1764962232 | 600 Count | 351 Count | 86 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)