This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1772744721 | 464 Volts | 580 Deg.F | 0 | 0 | 0 |
| 1772740237 | 499 Volts | 583 Deg.F | 0 | 0 | 0 |
| 1772740136 | 496 Volts | 583 Deg.F | 0 | 0 | 0 |
| 1772739839 | 494 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1772739698 | 495 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1772738514 | 502 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1772737834 | 498 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1772654905 | 448 Volts | 577 Deg.F | 0 | 0 | 0 |
| 1772654008 | 469 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1772652214 | 471 Volts | 576 Deg.F | 0 | 0 | 0 |
| 1772651317 | 445 Volts | 575 Deg.F | 0 | 0 | 0 |
| 1772648625 | 454 Volts | 574 Deg.F | 0 | 0 | 0 |
| 1772647728 | 447 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1772646831 | 450 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1772645934 | 449 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1772645068 | 448 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1772644139 | 446 Volts | 571 Deg.F | 0 | 0 | 0 |
| 1772642344 | 445 Volts | 570 Deg.F | 0 | 0 | 0 |
| 1772641447 | 452 Volts | 569 Deg.F | 0 | 0 | 0 |
| 1772639653 | 445 Volts | 568 Deg.F | 0 | 0 | 0 |
| 1772638756 | 446 Volts | 567 Deg.F | 0 | 0 | 0 |
| 1772637859 | 444 Volts | 567 Deg.F | 0 | 0 | 0 |
| 1772636962 | 450 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1772635167 | 443 Volts | 564 Deg.F | 0 | 0 | 0 |
| 1772634270 | 457 Volts | 564 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)