This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793952603 | 641 Count | 542 Count | 425 Count | 3.46 VDC | 0.14 VDC |
| 1793948998 | 640 Count | 542 Count | 425 Count | 3.41 VDC | 0.14 VDC |
| 1793947671 | 639 Count | 542 Count | 425 Count | 3.36 VDC | 0.14 VDC |
| 1793931344 | 638 Count | 542 Count | 425 Count | 3.39 VDC | 0.14 VDC |
| 1793927447 | 637 Count | 542 Count | 425 Count | 3.4 VDC | 0.14 VDC |
| 1793913058 | 633 Count | 542 Count | 425 Count | 3.48 VDC | 0.14 VDC |
| 1793895062 | 599 Count | 503 Count | 396 Count | 3.5 VDC | 0.14 VDC |
| 1793869857 | 582 Count | 479 Count | 386 Count | 3.53 VDC | 0.14 VDC |
| 1793862646 | 580 Count | 479 Count | 386 Count | 3.41 VDC | 0.14 VDC |
| 1793861431 | 579 Count | 479 Count | 386 Count | 3.39 VDC | 0.14 VDC |
| 1793449289 | 560 Count | 470 Count | 379 Count | 3.36 VDC | 0.14 VDC |
| 1793445684 | 541 Count | 450 Count | 361 Count | 3.39 VDC | 0.14 VDC |
| 1793365497 | 540 Count | 450 Count | 361 Count | 3.37 VDC | 0.14 VDC |
| 1793361892 | 539 Count | 450 Count | 361 Count | 3.36 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)