This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764985366 | 326 Count | 486 Count | 152 Count | 3.93 VDC | 0 VDC |
| 1764984765 | 324 Count | 484 Count | 151 Count | 3.92 VDC | 0 VDC |
| 1764984165 | 322 Count | 481 Count | 150 Count | 3.94 VDC | 0 VDC |
| 1764983566 | 320 Count | 479 Count | 149 Count | 3.92 VDC | 0 VDC |
| 1764982965 | 318 Count | 477 Count | 148 Count | 3.94 VDC | 0 VDC |
| 1764982365 | 316 Count | 474 Count | 147 Count | 3.89 VDC | 0 VDC |
| 1764981764 | 314 Count | 472 Count | 146 Count | 3.95 VDC | 0 VDC |
| 1764978781 | 300 Count | 459 Count | 141 Count | 3.96 VDC | 0 VDC |
| 1764973375 | 281 Count | 439 Count | 131 Count | 4 VDC | 0 VDC |
| 1764972774 | 279 Count | 438 Count | 130 Count | 4.01 VDC | 0 VDC |
| 1764972173 | 277 Count | 436 Count | 129 Count | 4.01 VDC | 0 VDC |
| 1764971573 | 276 Count | 434 Count | 129 Count | 4.01 VDC | 0 VDC |
| 1764970372 | 273 Count | 430 Count | 128 Count | 4.02 VDC | 0 VDC |
| 1764969771 | 271 Count | 424 Count | 127 Count | 4 VDC | 0 VDC |
| 1764969170 | 269 Count | 421 Count | 126 Count | 4.02 VDC | 0 VDC |
| 1764968570 | 267 Count | 420 Count | 125 Count | 4 VDC | 0 VDC |
| 1764967969 | 265 Count | 417 Count | 124 Count | 4.03 VDC | 0 VDC |
| 1764967368 | 263 Count | 414 Count | 123 Count | 4.04 VDC | 0 VDC |
| 1764966767 | 261 Count | 411 Count | 122 Count | 4.04 VDC | 0 VDC |
| 1764966166 | 258 Count | 402 Count | 120 Count | 4.04 VDC | 0 VDC |
| 1764965568 | 256 Count | 400 Count | 119 Count | 4.05 VDC | 0 VDC |
| 1764964967 | 254 Count | 397 Count | 118 Count | 4.05 VDC | 0 VDC |
| 1764964367 | 252 Count | 394 Count | 117 Count | 4.05 VDC | 0 VDC |
| 1764963165 | 248 Count | 389 Count | 115 Count | 4.06 VDC | 0 VDC |
| 1764959585 | 232 Count | 371 Count | 109 Count | 4.08 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)