This is the latest recevied telemetry packets stored in our database for station/object F6DEV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1794037484 | 4.23 VDC | 153 pkt/h | 17 pkt/h | 136 pkt/h | 0 |
| 1794033883 | 4.24 VDC | 139 pkt/h | 18 pkt/h | 121 pkt/h | 0 |
| 1794030283 | 4.23 VDC | 112 pkt/h | 14 pkt/h | 98 pkt/h | 0 |
| 1794026683 | 4.23 VDC | 154 pkt/h | 13 pkt/h | 141 pkt/h | 0 |
| 1794015869 | 4.23 VDC | 146 pkt/h | 18 pkt/h | 128 pkt/h | 0 |
| 1794001463 | 4.23 VDC | 208 pkt/h | 21 pkt/h | 187 pkt/h | 0 |
| 1793997863 | 4.22 VDC | 202 pkt/h | 17 pkt/h | 185 pkt/h | 0 |
| 1793987043 | 4.23 VDC | 204 pkt/h | 16 pkt/h | 188 pkt/h | 0 |
| 1793979842 | 4.23 VDC | 212 pkt/h | 36 pkt/h | 176 pkt/h | 0 |
| 1793969181 | 4.23 VDC | 142 pkt/h | 12 pkt/h | 130 pkt/h | 0 |
| 1793965458 | 4.23 VDC | 183 pkt/h | 14 pkt/h | 169 pkt/h | 0 |
| 1793947401 | 4.24 VDC | 124 pkt/h | 6 pkt/h | 118 pkt/h | 0 |
| 1793940200 | 4.22 VDC | 102 pkt/h | 7 pkt/h | 95 pkt/h | 0 |
| 1793936600 | 4.23 VDC | 106 pkt/h | 6 pkt/h | 100 pkt/h | 0 |
| 1793933003 | 4.23 VDC | 140 pkt/h | 12 pkt/h | 128 pkt/h | 0 |
| 1793929381 | 4.24 VDC | 137 pkt/h | 15 pkt/h | 122 pkt/h | 0 |
| 1793889764 | 4.23 VDC | 128 pkt/h | 17 pkt/h | 111 pkt/h | 0 |
| 1793871738 | 4.23 VDC | 190 pkt/h | 24 pkt/h | 166 pkt/h | 0 |
| 1793853718 | 4.23 VDC | 131 pkt/h | 6 pkt/h | 125 pkt/h | 0 |
| 1793846518 | 4.22 VDC | 116 pkt/h | 7 pkt/h | 109 pkt/h | 0 |
| 1793842898 | 4.24 VDC | 133 pkt/h | 8 pkt/h | 125 pkt/h | 0 |
| 1793832098 | 4.23 VDC | 118 pkt/h | 8 pkt/h | 110 pkt/h | 0 |
| 1793814084 | 4.23 VDC | 124 pkt/h | 4 pkt/h | 120 pkt/h | 0 |
| 1793799658 | 4.24 VDC | 115 pkt/h | 8 pkt/h | 107 pkt/h | 0 |
| 1793785257 | 4.23 VDC | 245 pkt/h | 50 pkt/h | 195 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)